to https://www.d-logic.net/code/nfc-rfid-reader-sdk/ufr-examples-reader_open-c

-Added instructions for functions enabling 'Digital Logic JCApp on Java Cards' support for the Signer applet.

+ ReaderList_UpdateAndGetCount()
+ ReaderList_GetInformation()
+ ReaderList_Destroy()

Added descriptions for commands and functions supporting ISO 14443-4A protocol commands, fully implemented in the uFR firmware.

-Affected documents: "uFR Reader API.odt" and "uFR_COM_Protocol.odt"

Updated "Support for ISO 14443-4 protocol commands" and "Support for APDU commands in ISO 14443-4 tags"

-Affected documents: "uFR Reader API.odt" and "uFR_COM_Protocol.odt"

On page 59 added:
Support for APDU commands in ISO 14443-4 tags.

Added reference fields in document revision table. (press F9 if the automatic references update is disabled)

"uFR Reader API"
on page 7. FAST_READ ISO14443-3 command with LinearRead utilisation.

"uFR_COM_Protocol"
on page 25. FAST_READ ISO14443-3 command with LINEAR_READ utilisation.

On pages 7, 9, 12, 14, 60: ucAuthMode parameter description changed regarding authentication mode considerations for NTAG 21x and other T2T tags. Applied to lib functions: LinearRead, LinearWrite, BlockRead, BlockWrite and LinearRowRead.

On page 16: Title “Authentication mode considerations” changed to “Authentication mode considerations for Mifare Classic tags”

On page 17: New Title “Authentication mode considerations for NTAG 21x and other T2T tags”

ReaderOpenByType() new API function for speed up opening for non uFR basic reader type

Added description of GetLastCardIdEx() function for getting information from the uFReader about last detected card.


git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@47 82f89cc5-d14e-4888-bf1e-543a7d800ef9

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@46 82f89cc5-d14e-4888-bf1e-543a7d800ef9

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@45 82f89cc5-d14e-4888-bf1e-543a7d800ef9

Function to use shared RAM in device.

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@44 82f89cc5-d14e-4888-bf1e-543a7d800ef9

- SetSpeedPermanently()
- GetSpeedParameters()

Changed document file name from "ufR Redaer WinAPI.odt" to "uFR Redaer API.odt"

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@42 82f89cc5-d14e-4888-bf1e-543a7d800ef9

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@41 82f89cc5-d14e-4888-bf1e-543a7d800ef9

Added commands for configuring baud rates between reader and ISO14443–4A cards/tags (supported from firmware version 3.8.4):
SET_SPEED_PERMANENTLY (0x4B)
GET_SPEED_PARAMETERS (0x4C)


git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@40 82f89cc5-d14e-4888-bf1e-543a7d800ef9

Removed WinAPI (again) from filename, minor changes in text.

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@39 82f89cc5-d14e-4888-bf1e-543a7d800ef9

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@38 82f89cc5-d14e-4888-bf1e-543a7d800ef9

WRITE_EMULATION_NDEF (0x4A)
TAG_EMULATION_START (0x48)
TAG_EMULATION_STOP (0x49)


git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@37 82f89cc5-d14e-4888-bf1e-543a7d800ef9

WriteEmulationNdef(),
TagEmulationStart(),
TagEmulationStop()

git-svn-id: svn://192.168.1.162/sw_open/ufr/doc/trunk@36 82f89cc5-d14e-4888-bf1e-543a7d800ef9