Finished implementation of the "APDU Transceive" in the firmware (using APDU_TRANSCEIVE command).

UFR_STATUS DL_API SetISO14443_4_Mode(void);
UFR_STATUS DL_API SetISO14443_4_ModeM(UFR_HANDLE hndUFR);

Finished NFC T4T support for NDEF messages using APDU support through "ISO14443-4 half-duplex block transmission protocol (i_block, r_block and s_block)".
All functions in library that support NDEF messages now working with NFC T4T cards.

Added functions:
UFR_STATUS GetAdHocEmulationParams(uint8_t *ThresholdMinLevel, uint8_t *ThresholdCollLevel,
								   uint8_t *RFLevelAmp, uint8_t *RxGain, uint8_t *RFLevel);
UFR_STATUS SetAdHocEmulationParams(uint8_t ThresholdMinLevel, uint8_t ThresholdCollLevel,
								   uint8_t RFLevelAmp, uint8_t RxGain, uint8_t RFLevel);
UFR_STATUS GetAdHocEmulationParamsM(UFR_HANDLE hndUFR,
								    uint8_t *ThresholdMinLevel, uint8_t *ThresholdCollLevel,
								    uint8_t *RFLevelAmp, uint8_t *RxGain, uint8_t *RFLevel);
UFR_STATUS SetAdHocEmulationParamsM(UFR_HANDLE hndUFR,
								    uint8_t ThresholdMinLevel, uint8_t ThresholdCollLevel,
								    uint8_t RFLevelAmp, uint8_t RxGain, uint8_t RFLevel);

Dependency for these functions: uFR firmware - min. version 3.9.35

Added functions:
UFR_STATUS AdHocEmulationStart(void);
UFR_STATUS AdHocEmulationStop(void);
UFR_STATUS GetExternalFieldState(uint8_t *is_field_present);

UFR_STATUS AdHocEmulationStartM(UFR_HANDLE hndUFR);
UFR_STATUS AdHocEmulationStopM(UFR_HANDLE hndUFR);
UFR_STATUS GetExternalFieldStateM(UFR_HANDLE hndUFR, uint8_t *is_field_present);

choosing mode depends of communication speed in ReaderOpen()

BugFix in SelectCardHnd(), in anticoll.c

* support for D-Logic HAT (reset on GPIO23), and uFR RS232 at 115200

The first big testing of the EEPROM partitions and FW version 4.x

Libraries files:
  + include / header files
  + Binaries for multiple OS-es and platforms:
    + 32 and 64 bit Windows Intel,
    + 32 and 64 bit Windows Intel static GCC libraries,
    + 32 and 64 bit Linux Intel,
    + 64 bit OS X Intel,
    + 32 bit Linux ARM
    + 32 bit Linux ARM-HF

+ variables for tick counter is in unsigned long data type

* only Windows DLL

+ def files

* only Windows DLL

Fixed DST (summer time) in CardEncryption

Libraries files:
  + include / header files
  + Binaries for multiple OS-es and platforms:
    + 32 and 64 bit Windows Intel,
    + 32 and 64 bit Windows Intel static GCC libraries,
    + 32 and 64 bit Linux Intel,
    + 64 bit OS X Intel,
    + 32 bit Linux ARM
    + 32 bit Linux ARM-HF

Added support for APDU commands for ISO 14443-4 tags through i-blocks (if tag support APDU commands).
Added functions:
UFR_STATUS DL_API uFR_APDU_Transceive(uint8_t cls, uint8_t ins, uint8_t p0, uint8_t p1, uint8_t *data_out, uint8_t data_out_len, uint8_t *data_in, uint8_t *response_len, uint8_t send_le);
UFR_STATUS DL_API uFR_APDU_TransceiveM(UFR_HANDLE hndUFR, uint8_t cls, uint8_t ins, uint8_t p0, uint8_t p1, uint8_t *data_out, uint8_t data_out_len, uint8_t *data_in, uint8_t *response_len, uint8_t send_le);
UFR_STATUS DL_API uFR_DESFIRE_StartM(UFR_HANDLE hndUFR);
UFR_STATUS DL_API uFR_DESFIRE_StopM(UFR_HANDLE hndUFR);

Added function "aliases":
UFR_STATUS DL_API uFR_APDU_Start(void);               // Alias for uFR_DESFIRE_Start()
UFR_STATUS DL_API uFR_APDU_StartM(UFR_HANDLE hndUFR); // Alias for uFR_DESFIRE_StartM()
UFR_STATUS DL_API uFR_APDU_Stop(void);                // Alias for uFR_DESFIRE_Stop()
UFR_STATUS DL_API uFR_APDU_StopM(UFR_HANDLE hndUFR);  // Alias for uFR_DESFIRE_StopM()

Support for UID byte order and decimal represenation od card UID, in the async UID sending.
Functions added
UFR_STATUS DL_API SetAsyncCardIdSendConfigEx(uint8_t send_enable,
		uint8_t prefix_enable, uint8_t prefix, uint8_t suffix,
		uint8_t send_removed_enable, uint8_t reverse_byte_order,
		uint8_t decimal_representation, uint32_t async_baud_rate);
UFR_STATUS DL_API GetAsyncCardIdSendConfigEx(uint8_t *send_enable,
		uint8_t *prefix_enable, uint8_t *prefix, uint8_t *suffix,
		uint8_t *send_removed_enable, uint8_t *reverse_byte_order,
		uint8_t *decimal_representation, uint32_t *async_baud_rate);
UFR_STATUS DL_API SetAsyncCardIdSendConfigExM(UFR_HANDLE hndUFR,
		uint8_t send_enable, uint8_t prefix_enable, uint8_t prefix,
		uint8_t suffix, uint8_t send_removed_enable, int8_t 		reverse_byte_order,
		uint8_t decimal_representation, uint32_t async_baud_rate);
UFR_STATUS DL_API GetAsyncCardIdSendConfigExM(UFR_HANDLE hndUFR,
		uint8_t *send_enable, uint8_t *prefix_enable, uint8_t *prefix,
		uint8_t *suffix, uint8_t *send_removed_enable, uint8_t 		*reverse_byte_order,
		uint8_t *decimal_representation, uint32_t *async_baud_rate);

* BUGFIX : Reader Open error with error UFR_COMMUNICATION_BRAKE on serial port
* ReaderOpenExHnd(), after opening the communication port and wait for firmware start,
try several times to get reader HW version

* BUGFIX : serial port stay blocked on Linux/OSX if some error occurred while changing port configuration
> fixed in rs232_serial_port_init() : close() port if error occurred

* BUGFIX: timeout problem on 64 bit systems

Support for the ASCII mirror function of the NXP NTAG21x series.
Added functions:
UFR_STATUS DL_API write_ndef_record_mirroring(uint8_t message_nr, uint8_t *tnf, uint8_t *type_record, uint8_t *type_length, uint8_t *id, uint8_t *id_length, uint8_t *payload, uint32_t *payload_length, uint8_t *card_formated, int use_uid_ascii_mirror, int use_counter_ascii_mirror, uint32_t payload_mirroring_pos);
UFR_STATUS DL_API write_ndef_record_mirroringM(UFR_HANDLE hndUFR, uint8_t message_nr, uint8_t *tnf, uint8_t *type_record, uint8_t *type_length, uint8_t *id, uint8_t *id_length, uint8_t *payload, uint32_t *payload_length, uint8_t *card_formated, int use_uid_ascii_mirror, int use_counter_ascii_mirror, uint32_t payload_mirroring_pos);
Those functions use already existing NDEF functionality of the uFRCoder library.

-Added static libraries for Windows, x86 and x86_64 both. When you use uFCoder static library, you must linking FTDI d2xx library in your project to. See http://www.ftdichip.com/ for more details.
-When you use uFCoder static library in your project, define macro:
#define DL_USE_STATIC_LIB
before include uFCoder.h or set -DDL_USE_STATIC_LIB as compiler directive.

Finished T2T counters (especially for NXP UL EV1 & NTAG 21x) support.

Added:
DL_API UFR_STATUS ReadCounter(uint8_t counter_address, uint32_t *value);
DL_API UFR_STATUS IncrementCounter(uint8_t counter_address, uint32_t inc_value);
DL_API UFR_STATUS ReadNFCCounter(uint32_t *value); // Same as ReadCounter(2, &value);
DL_API UFR_STATUS ReadNFCCounterPwdAuth_RK(uint32_t *value, uint8_t reader_key_index);
DL_API UFR_STATUS ReadNFCCounterPwdAuth_PK(uint32_t *value, const uint8_t *key);

DL_API UFR_STATUS ReadCounterM(UFR_HANDLE hndUFR, uint8_t counter_address, uint32_t *value);
DL_API UFR_STATUS IncrementCounterM(UFR_HANDLE hndUFR, uint8_t counter_address, uint32_t inc_value);
DL_API UFR_STATUS ReadNFCCounterM(UFR_HANDLE hndUFR, uint32_t *value); // Same as ReadCounter(2, &value);
DL_API UFR_STATUS ReadNFCCounterPwdAuth_RKM(UFR_HANDLE hndUFR, uint32_t *value, uint8_t reader_key_index);
DL_API UFR_STATUS ReadNFCCounterPwdAuth_PKM(UFR_HANDLE hndUFR, uint32_t *value, const uint8_t *key);

Implemented serial port communication for Windows IoT serial device.

For testing on Windows IoT,
use ReaderOpenEx() for connect to the reader,
use win_iot_serial.dll

!!! All multi-reader functions are disabled on Windows IoT
 - ReaderList_UpdateAndGetCount()
 - ReaderList_GetInformation()
 - ReaderList_Destroy()
 - ReaderList_GetSerialByIndex()
 - ReaderList_GetSerialDescriptionByIndex()
 - ReaderList_GetTypeByIndex()
 - ReaderList_GetFTDISerialByIndex()
 - ReaderList_GetFTDIDescriptionByIndex()
 - ReaderList_OpenBySerial()
 - ReaderList_OpenByIndex()

 - API OriginalityCheck() not implemented on WIN IoT

* some bug fixes

Libraries files:
  + include / header files
  + Binaries for multiple OS-es and platforms:
    + 32 and 64 bit Windows Intel,
	+ 32 bit Windows IoT ARM
    + 32 and 64 bit Linux Intel,
    + 64 bit OS X Intel,
    + 32 bit Linux ARM
    + 32 bit Linux ARM-HF

Merged versions 4.0.1 and 3.9.14 ( OriginalityCheck() )

* fixed some bugs

Libraries files:
  + include / header files
  + Binaries for multiple OS-es and platforms:
    + 32 and 64 bit Windows Intel,
    + 32 and 64 bit Linux Intel,
    + 64 bit OS X Intel,
    + 32 bit Linux ARM
    + 32 bit Linux ARM-HF

Implemented communication with serial devices ( not FTDI )

Can communicate with devices without FTDI ( RS232 devices )
via serial, non FT functions, for Windows, Linux and OSX.

+ ReaderOpenEx() - new extended API function for opening a reader over FTDI or serial

New global error constants:
 + UFR_NOT_IMPLEMENTED
 + UFR_COMMAND_FAILED

- removed deprecated type : chr_ptr
- removed deprecated function : error_get()

* Lots of changes and improvements.

Libraries files:
  + include / header files
  + Binaries for multiple OS-es and platforms:
    + 32 and 64 bit Windows Intel,
    + 32 and 64 bit Linux Intel,
    + 64 bit OS X Intel,
    + 32 bit Linux ARM
    + 32 bit Linux ARM-HF

Signed-off-by: srkos